Page 1 of 1

led taillight conversion

Posted: February 18th, 2009, 9:55 pm
by N8DAWG
thinking about doing a led taillight conversion and was woundering if anyone had some tidbits of information on the matter.

Posted: February 18th, 2009, 11:04 pm
by CommodoreDiegoFirebeard
My .02...Tape off the body with masking tape by where you plan to cut...Saves the paint from stray shavings that like to scratch and eat painted surfaces. Easier to mark the layout on the tape with a Sharpie as well...

Posted: February 18th, 2009, 11:08 pm
by N8DAWG
thanks never would have thought of that.

Posted: April 2nd, 2009, 3:33 pm
by HerTJ_HisWork
what year you got? I got LOTS of info on LED tails if you got an 01 or newer

Posted: April 2nd, 2009, 5:23 pm
by N8DAWG
no mines a 99

Posted: April 2nd, 2009, 6:18 pm
by sandfox
my trucking buddy has a 4 1/2 hole saw, when i get back from vacation ,i am gunna sink some in my 98, do the flasher mod and should be good :D

Posted: April 3rd, 2009, 12:07 am
by Wolf
http://grote.com/product.php?product_number=G5202
http://grote.com/product.php?product_number=G5212

these are what ive been considering, though have not been able to find a price or stocking dealer yet

Posted: April 4th, 2009, 3:15 am
by Wolf
Picked up the two Grote lights i listed in previous post from power brake and spring for 70 each, seem to be very well made, will install in the morning and let ya know what i think from there

Posted: April 12th, 2009, 1:55 am
by Wolf
installed lights and love them so far, Much Much brighter then stock, very simple install, just wish they had been direct plug in, speaking of which anyone know where to get weatherpack connectors?