H1 winch

Any towing and winching discussions incl..towing accessories, Hijack, Straps, Links, winches, air inflators, jacks, ect.

Moderator: Tec Team

User avatar
CapnDave
Posts: 559
Joined: March 28th, 2008, 6:24 pm
Location: Niles, MI
Contact:

H1 winch

Post by CapnDave »

im gettin a h1 winch it is not wokring
the guy said it clicks and wont turn
88 cherokee pioneer chrysler 8.25 dana 30
6.5 inch lift 35" procomp xterrains
User avatar
Blue Rubi
Posts: 92
Joined: May 12th, 2007, 10:32 pm
Location: North Liberty, IN

Post by Blue Rubi »

I know a guy that rebuilds them
Pete
'05 Rubicon Unlimited
4" Rough Country,33" BFG/TA, Bilsten Shocks, Rampage Recovery Rear Bumper W/Tire Carrier, 60" Black Box Fabrication Front Bumper W/Custom Tube work, Navigator Off Road Lights
/l ,[____],
l---L –0lllllll0-
()_) ()_)--o-)_)
User avatar
CapnDave
Posts: 559
Joined: March 28th, 2008, 6:24 pm
Location: Niles, MI
Contact:

Post by CapnDave »

i tore it apart it needs the brush assembly looks like some one over heated it or something
88 cherokee pioneer chrysler 8.25 dana 30
6.5 inch lift 35" procomp xterrains
Duff
Posts: 658
Joined: April 19th, 2009, 10:32 am
Location: Spring Hill, TN

H1 winch

Post by Duff »

not sure if you already figured this out or not - but all HMMWV winches I have ever seen are 24 VDC not 12 VDC (like your jeep). So you may have to make sure you put a 12 VDC motor on it... Just my .02 cents...
-Duff
Last edited by Duff on October 8th, 2009, 9:48 am, edited 1 time in total.
: 98 TJ : 14" coilovers : 35 TSL : D44/D60 4:88 ARB : Warn 8274 : Snorkel : Lights :
User avatar
CapnDave
Posts: 559
Joined: March 28th, 2008, 6:24 pm
Location: Niles, MI
Contact:

Post by CapnDave »

its a 12 volt
Last edited by CapnDave on June 27th, 2009, 4:20 pm, edited 1 time in total.
88 cherokee pioneer chrysler 8.25 dana 30
6.5 inch lift 35" procomp xterrains
User avatar
CapnDave
Posts: 559
Joined: March 28th, 2008, 6:24 pm
Location: Niles, MI
Contact:

Post by CapnDave »

they do that so there is higher amperage since a diesel uses compression to ignite fuel so it needs the extra amperage for the starter to over come the compression since compression ratios in diesels are 17:1 - 25:1
88 cherokee pioneer chrysler 8.25 dana 30
6.5 inch lift 35" procomp xterrains
User avatar
dirkrc51
Posts: 134
Joined: March 2nd, 2008, 11:40 pm
Location: Granger

Post by dirkrc51 »

HMMWV use a 24 volt system......Some times people interchange the word Hummer and HMMWV.......electrical system is just one of the many differences between the two.
97 TJ LT1
User avatar
CapnDave
Posts: 559
Joined: March 28th, 2008, 6:24 pm
Location: Niles, MI
Contact:

Post by CapnDave »

yup i was just gettin back on to say that
88 cherokee pioneer chrysler 8.25 dana 30
6.5 inch lift 35" procomp xterrains
HerTJ_HisWork
Posts: 14
Joined: October 30th, 2008, 10:04 pm

Post by HerTJ_HisWork »

damn! I would think that would PLENTY of winch for a jeep...kick "donkey butt"!
Mark and Amanda
2001 TJ Sport Gunmetal Blue
35in Big O X/Ts on Granite Alloy GA9s
DIY high line fenders
Daystar front and rear tube bumpers
10k winch
Daystar sidesteps/rocker guards
flush mount led taillights
custom side exit flowmaster exhaust
530 watts of auxilary lighting
User avatar
CapnDave
Posts: 559
Joined: March 28th, 2008, 6:24 pm
Location: Niles, MI
Contact:

Post by CapnDave »

yea as long as i can get it running
88 cherokee pioneer chrysler 8.25 dana 30
6.5 inch lift 35" procomp xterrains
User avatar
dirkrc51
Posts: 134
Joined: March 2nd, 2008, 11:40 pm
Location: Granger

Post by dirkrc51 »

Is it a Warn or MileMarker....If it is a Warn, it is completely rebuildable, and should be too hard to find parts.
If you have trouble finding parts, let me know, I might be able help.
97 TJ LT1
User avatar
CapnDave
Posts: 559
Joined: March 28th, 2008, 6:24 pm
Location: Niles, MI
Contact:

Post by CapnDave »

i dont have to money to buy parts from warn its 70 dollars it is a warn series 12
88 cherokee pioneer chrysler 8.25 dana 30
6.5 inch lift 35" procomp xterrains
Duff
Posts: 658
Joined: April 19th, 2009, 10:32 am
Location: Spring Hill, TN

so? what's the verdict?

Post by Duff »

So the verdict is....
You have a winch (12 or 24VDC) but either way, you dont have any money to rebulid it? Got the picture...
: 98 TJ : 14" coilovers : 35 TSL : D44/D60 4:88 ARB : Warn 8274 : Snorkel : Lights :
Duff
Posts: 658
Joined: April 19th, 2009, 10:32 am
Location: Spring Hill, TN

winch notes...

Post by Duff »

BTW: I do have a series 12 motor in my tool box, it's right next to the WARN controller lead that I gave to FastTRX for free last week - because I just dont run a WARN at the moment (great winch though). Ya know, if you would have not been such a dork, I would have just given ya a new motor for free - unfortunaly I had to put a comment out there to figure out what you were runn'in and ya tried to slam me - good job!
: 98 TJ : 14" coilovers : 35 TSL : D44/D60 4:88 ARB : Warn 8274 : Snorkel : Lights :
User avatar
CapnDave
Posts: 559
Joined: March 28th, 2008, 6:24 pm
Location: Niles, MI
Contact:

Post by CapnDave »

no i just figured id explain i was not trying to be a dick sorry if it seemed like it but yes it is the 12 volt motor
88 cherokee pioneer chrysler 8.25 dana 30
6.5 inch lift 35" procomp xterrains
Duff
Posts: 658
Joined: April 19th, 2009, 10:32 am
Location: Spring Hill, TN

warn winch

Post by Duff »

Well, I'm real tired of trying to help out fools like you. I just got done buying a winch for DJ and gave him the bumper I won in the drawing at the badlands and welded it on his ride for him and did the fab work to make it fit - then offered my garage and all my time and effort to get the motor swapped out that got "hydro-stupid" broken at Lochmundy (yep, you were there). And my garage is still a wreck (for me to clean because I got his XJ running, and he never came back to clean it)... NOW YOU... Well, buddy - believe me when I say, I'm tired of helping out people that want to be dicks. And yes, I have the motor you need - and yes I spent over $400 to help DJ get his XJ back on the road, and he can not even show up to clean my garage (I dont even want the cash back, how about just clean up the mess)... And again - now you... Well, bud - you should ask yourself just who your trying to 'school' before you go schooling - I'm a degreed Mechanical Engineer who works at HUMMER, and yes MOST of the winches I see on the HMMWV line are 24VDC, also at one time I was an ASE certified mechanic prior to finishing my ME degree. Good luck finding your motor...
: 98 TJ : 14" coilovers : 35 TSL : D44/D60 4:88 ARB : Warn 8274 : Snorkel : Lights :
FastTRX
Posts: 93
Joined: February 21st, 2007, 9:32 pm
Location: Walkerton, IN

Post by FastTRX »

Duff...I need a brake job done on my XJ. While you're at it can you just swap the axles while you're under there. Oh BTW you have to buy the axles...I have no money. Ohh and can I just have your Jeep? Thanks pal! :)
Mall crawlin' since 02'. Some things never change...
User avatar
xjjeepthing
Posts: 716
Joined: January 18th, 2007, 9:30 pm
Location: Plymouth IN
Contact:

Post by xjjeepthing »

LOL :smt044
God grant me the serenity to accept the impossible trails I cannot crawl, courage to crawl the twisted trails I can and the wisdom to keep the tire side down.
User avatar
CapnDave
Posts: 559
Joined: March 28th, 2008, 6:24 pm
Location: Niles, MI
Contact:

Post by CapnDave »

i was not trying to school you or anything i was just trying say it was a hummer not a hmmwv and added the rest so everyone else knew the difference
i know that your a good guy and you let dj use your garage thats a great thing to do if i had to garage space and tools i would do the same like i said im sorry i tried to explain the difference so others could see
88 cherokee pioneer chrysler 8.25 dana 30
6.5 inch lift 35" procomp xterrains
User avatar
Blue Rubi
Posts: 92
Joined: May 12th, 2007, 10:32 pm
Location: North Liberty, IN

Post by Blue Rubi »

I like koolaid
Pete
'05 Rubicon Unlimited
4" Rough Country,33" BFG/TA, Bilsten Shocks, Rampage Recovery Rear Bumper W/Tire Carrier, 60" Black Box Fabrication Front Bumper W/Custom Tube work, Navigator Off Road Lights
/l ,[____],
l---L –0lllllll0-
()_) ()_)--o-)_)
Post Reply