Page 1 of 1
gusset dana 30
Posted: January 12th, 2012, 5:54 pm
by demonjk
so i bought some gussets for my wrangler it has a dana 30 and thats all fine but my problem is i dont have a welder and they need to be welded on. So if any of you have a welder and can help i would be greatly appreciative in fact i would offer payment of a case of beer or a couple drinks of your choice. Since im only using alittle time and your welder i think that is fair. If you could help let me know along with what kind of drinks you would like for the help.
Re: gusset dana 30
Posted: January 12th, 2012, 7:40 pm
by speeduck
post up a link on here so i can see what you have to weld up..
Re: gusset dana 30
Posted: January 12th, 2012, 11:48 pm
by demonjk
Re: gusset dana 30
Posted: January 12th, 2012, 11:51 pm
by Zuk
Clint, they are "C" brackets that weld around the face of the knuckle. Looking @ the knuckle from the front, they weld on the flat face. Sometimes you have to notch the "C" bracket around the spring bucket but I think that`s only on TJ`s. My biggest concern is the heat getting to the ball joints!
EVO-AXLEGUSSETS.jpg
Re: gusset dana 30
Posted: January 13th, 2012, 4:28 pm
by speeduck
zuk524 wrote:Clint, they are "C" brackets that weld around the face of the knuckle. Looking @ the knuckle from the front, they weld on the flat face. Sometimes you have to notch the "C" bracket around the spring bucket but I think that`s only on TJ`s. My biggest concern is the heat getting to the ball joints!
EVO-AXLEGUSSETS.jpg
mike, i know what they are silly, i just wanted to see which ones, as some are a little differant, and the ones he's got will turn all the grease in the ball joint to straight carbon, if welded on correctly...... hmmm
Re: gusset dana 30
Posted: January 13th, 2012, 4:49 pm
by comancheman
speeduck wrote:zuk524 wrote:Clint, they are "C" brackets that weld around the face of the knuckle. Looking @ the knuckle from the front, they weld on the flat face. Sometimes you have to notch the "C" bracket around the spring bucket but I think that`s only on TJ`s. My biggest concern is the heat getting to the ball joints!
EVO-AXLEGUSSETS.jpg
mike, i know what they are silly, i just wanted to see which ones, as some are a little differant, and the ones he's got will turn all the grease in the ball joint to straight carbon, if welded on correctly...... hmmm
Silly? Really..........
Re: gusset dana 30
Posted: January 13th, 2012, 5:35 pm
by demonjk
Re: gusset dana 30
Posted: January 14th, 2012, 9:08 am
by sandfox
that link doesnt work, and if i just use the number ( 0365592444) i get a mr domino game ??? the first link you posted as to what you bought ,is what is shown in the above pic . so this is not what you bought then ????
Re: gusset dana 30
Posted: January 14th, 2012, 1:15 pm
by demonjk
this is wat i bought sry for the mix up everybody
Re: gusset dana 30
Posted: January 15th, 2012, 12:41 am
by Zuk
Same as what is pictured in the EVO pic. Look close and you`ll see the lower control arm skid. The C brackets are the same.
Re: gusset dana 30
Posted: January 15th, 2012, 6:38 am
by demonjk
ok fair enough my apologies. is anyone able to help be do this or am i looking at getting it done "professionally" ?