gusset dana 30
Moderator: Tec Team
- demonjk
- Posts: 149
- Joined: January 2nd, 2012, 8:29 pm
- Location: mishawaka
- Contact:
gusset dana 30
so i bought some gussets for my wrangler it has a dana 30 and thats all fine but my problem is i dont have a welder and they need to be welded on. So if any of you have a welder and can help i would be greatly appreciative in fact i would offer payment of a case of beer or a couple drinks of your choice. Since im only using alittle time and your welder i think that is fair. If you could help let me know along with what kind of drinks you would like for the help.
2010 Wrangler 2dr
1950 Ford F2
1950 Ford F2
-
- Posts: 640
- Joined: March 17th, 2011, 10:30 am
- Location: Elkhart
- Contact:
Re: gusset dana 30
post up a link on here so i can see what you have to weld up..
"05 rubicon"
1006RTI ramp/4"susp long arm/UCF belly up/xrc bumpers/T-max 10,000/cobra 29/motometal 909's/35's Falken Wildpeaks/kilby steerbox skid/quick double disconect sway/member of the endo
club"member of the red jeep club"
- demonjk
- Posts: 149
- Joined: January 2nd, 2012, 8:29 pm
- Location: mishawaka
- Contact:
Re: gusset dana 30
2010 Wrangler 2dr
1950 Ford F2
1950 Ford F2
- Zuk
- MJC member
- Posts: 750
- Joined: April 11th, 2011, 12:28 pm
Re: gusset dana 30
Clint, they are "C" brackets that weld around the face of the knuckle. Looking @ the knuckle from the front, they weld on the flat face. Sometimes you have to notch the "C" bracket around the spring bucket but I think that`s only on TJ`s. My biggest concern is the heat getting to the ball joints!
You do not have the required permissions to view the files attached to this post.
2001 Sahara, 4.0, auto, Rubicon express 5.5" long arm, Rubicon Dana 44's front and rear, OE air locker in front, ARB air locker in rear, 37" Mastercraft MXT's, 4.10's, Tera 2low, SYE, Currie Anti rock in front, Currie rock sliders, Barricade rear armor, Tmax 9k competition winch, Tmax 2.5k suck down winch in rear
-
- Posts: 640
- Joined: March 17th, 2011, 10:30 am
- Location: Elkhart
- Contact:
Re: gusset dana 30
zuk524 wrote:Clint, they are "C" brackets that weld around the face of the knuckle. Looking @ the knuckle from the front, they weld on the flat face. Sometimes you have to notch the "C" bracket around the spring bucket but I think that`s only on TJ`s. My biggest concern is the heat getting to the ball joints!
mike, i know what they are silly, i just wanted to see which ones, as some are a little differant, and the ones he's got will turn all the grease in the ball joint to straight carbon, if welded on correctly...... hmmm
"05 rubicon"
1006RTI ramp/4"susp long arm/UCF belly up/xrc bumpers/T-max 10,000/cobra 29/motometal 909's/35's Falken Wildpeaks/kilby steerbox skid/quick double disconect sway/member of the endo
club"member of the red jeep club"
-
- Posts: 212
- Joined: June 15th, 2010, 11:36 am
- Location: Elkhart, IN
Re: gusset dana 30
speeduck wrote:zuk524 wrote:Clint, they are "C" brackets that weld around the face of the knuckle. Looking @ the knuckle from the front, they weld on the flat face. Sometimes you have to notch the "C" bracket around the spring bucket but I think that`s only on TJ`s. My biggest concern is the heat getting to the ball joints!
mike, i know what they are silly, i just wanted to see which ones, as some are a little differant, and the ones he's got will turn all the grease in the ball joint to straight carbon, if welded on correctly...... hmmm
Silly? Really..........
1989 Comanche
_____
______l__c\_\,___
l_---\___l---[]IIIII[]
(o)_). (o)_)
--cost???......PRICELESS!!!!
_____
______l__c\_\,___
l_---\___l---[]IIIII[]
(o)_). (o)_)
--cost???......PRICELESS!!!!
- demonjk
- Posts: 149
- Joined: January 2nd, 2012, 8:29 pm
- Location: mishawaka
- Contact:
Re: gusset dana 30
2010 Wrangler 2dr
1950 Ford F2
1950 Ford F2
- sandfox
- CV team
- Posts: 971
- Joined: March 20th, 2007, 8:48 pm
- Location: wakarusa in
Re: gusset dana 30
that link doesnt work, and if i just use the number ( 0365592444) i get a mr domino game ??? the first link you posted as to what you bought ,is what is shown in the above pic . so this is not what you bought then ????
2013 jku sahara, 2.5 teraflex lift, 315 series generals, 410 gears ,just the new dune toy
2009 jku rubicon, 4"teraflex, 315 tires, 410 gears, oh did I mention 5.7 HEMI ?
APRIL 2010 J.O.T.M
wranglers i have had, 98 sport, 97 se, 88yj, 02 X, 01 sport, 05 X, 05 se, 99 sport, 98 se ,07 jk rubi, 05 x, 98sport, 2010 jku sport, 2013 jku sahara, 04 lj sport. 06 libby, 2009 jku HEMI , 80 j20, 04 lj sport, 03 tj X,
looking for 00 & 06
2009 jku rubicon, 4"teraflex, 315 tires, 410 gears, oh did I mention 5.7 HEMI ?
APRIL 2010 J.O.T.M
wranglers i have had, 98 sport, 97 se, 88yj, 02 X, 01 sport, 05 X, 05 se, 99 sport, 98 se ,07 jk rubi, 05 x, 98sport, 2010 jku sport, 2013 jku sahara, 04 lj sport. 06 libby, 2009 jku HEMI , 80 j20, 04 lj sport, 03 tj X,
looking for 00 & 06
- demonjk
- Posts: 149
- Joined: January 2nd, 2012, 8:29 pm
- Location: mishawaka
- Contact:
Re: gusset dana 30
this is wat i bought sry for the mix up everybody
You do not have the required permissions to view the files attached to this post.
2010 Wrangler 2dr
1950 Ford F2
1950 Ford F2
- Zuk
- MJC member
- Posts: 750
- Joined: April 11th, 2011, 12:28 pm
Re: gusset dana 30
Same as what is pictured in the EVO pic. Look close and you`ll see the lower control arm skid. The C brackets are the same.
2001 Sahara, 4.0, auto, Rubicon express 5.5" long arm, Rubicon Dana 44's front and rear, OE air locker in front, ARB air locker in rear, 37" Mastercraft MXT's, 4.10's, Tera 2low, SYE, Currie Anti rock in front, Currie rock sliders, Barricade rear armor, Tmax 9k competition winch, Tmax 2.5k suck down winch in rear
- demonjk
- Posts: 149
- Joined: January 2nd, 2012, 8:29 pm
- Location: mishawaka
- Contact:
Re: gusset dana 30
ok fair enough my apologies. is anyone able to help be do this or am i looking at getting it done "professionally" ?
2010 Wrangler 2dr
1950 Ford F2
1950 Ford F2